mobile concrete placing boom
Engineering, manufacturing and after-sales support for mobile concrete placing boom — specification, layout and quotation on.
View details
Guides
cement block brick making machine
Cement Block Brick Making Machine from HAMAC - a Chinese manufacturer established in 2005. Automatic, semi-automatic and hydraulic block and paver machines Send your output requirement and get a matched proposal within one working day.
Block Making Machines
cement block brick making machine
A cement block brick making machine converts zero-slump concrete into saleable units in about 20 seconds: the mould fills, the press head descends while the table vibrates, the green product is demoulded onto a pallet and moves to curing. Everything after that is handling and logistics.
HAMAC builds both egg-layer machines — economical, no pallets, output onto the floor — and full stationary pallet plants with finger cars, elevators and curing racks for higher volume and better surface finish. Mixing is matched to the machine by either a planetary or a pan mixer.
Most enquiries we receive start after a fleet problem — a pump that loses pressure on long booms, a mixer whose drum liners wear prematurely, a batching plant whose weighing tolerance drifts. Each of those has an engineering answer, and that answer belongs in the design stage rather than in the warranty claim.
Key Advantages of cement block brick making machine
Consistent compaction
Frequency-controlled vibration plus hydraulic press head ensures uniform density across the whole pallet.
Ready spare-parts kit
A consumable and wear-parts package ships with every machine to cover the first production months.
Heavy-duty frame
Stress-relieved welded frames resist the fatigue caused by continuous vibration.
Quick mould change
Moulds swap in roughly 20 minutes, allowing mixed product runs in one shift.
Cycle times near 15 seconds
Well-matched moulds and Servo vibration deliver fast demould without green-product damage.
PLC recipe control
Operators select the product and the machine sets vibration, fill time and press parameters automatically.
Technical Parameters
Indicative ranges for standard configurations. Final values are confirmed against your project requirements.
| Parameter | Specification |
|---|---|
| Model range | QT4-15, QT5-20, QT6-15, QT8-15, QT9-15, QT10-15 and larger |
| Cycle time | 15 - 25 seconds |
| Pallet size | 850 × 550 to 1400 × 900 mm |
| Vibration force | 35 - 120 kN, frequency adjustable |
| Installed power | 25 - 90 kW |
| Products per pallet | 4 - 12 hollow blocks (390×190×190 mm) |
| Control | PLC with touch screen and fault diagnostics |
| Feeding | Belt conveyor from planetary or pan mixer |
Typical Applications
On typical projects this equipment is selected where output reliability governs the whole schedule.
Hollow and solid blocks
Standard masonry units for load-bearing and partition walls
Fly ash and slag bricks
Industrial by-product utilisation for green building credits
Retaining wall blocks
Segmental units for landscape and road structures
Hydraulically pressed slabs
Industrial floors and hard-standing areas
Interlocking pavers
Pedestrian and light-traffic paving with colour-layer option
From Enquiry to Commissioning
Six defined stages, each with named deliverables, so nothing is left to interpretation.
Requirement study
We start with your mix design, hourly output target, aggregate size, jobsite power supply and site layout — not with a catalogue page.
Scheme design
Our engineering team issues a layout drawing, foundation loads, power requirement and an equipment list matched to the target output.
Quotation & contract
A fixed specification quotation with clear technical annexes protects both sides; no vague "standard configuration" wording.
Production & inspection
Weekly production photos, welding and pressure test records, plus third-party inspection if your project requires it.
Delivery & installation
Container or break-bulk shipment, then on-site supervision of assembly, alignment, calibration and dry-run.
After-sales
Remote diagnostics by video call, spare parts dispatch within 48 hours for stocked items, and periodic return visits.
Frequently Asked Questions about cement block brick making machine
How quickly does it pay back?
Most customers report 8-18 months depending on local block prices, shift pattern and raw material cost.
How much labour is needed?
A semi-automatic line needs about 5-7 people; a fully automatic pallet plant needs 3-4 plus forklift handling.
Can I use fly ash instead of cement?
Yes, typically replacing 20-40% of cement by weight, subject to the strength requirement and local standards.
What about cement content?
Typically 8-12% by weight for hollow blocks depending on the required strength and aggregate quality.
Which model should I start with?
For roughly 8,000-10,000 blocks per shift an QT4-15 class machine is mainstream; above 20,000 units per shift consider an QT8-15 or larger pallet plant.
Related Equipment & Resources
crawler spider concrete placing boom
Engineering, manufacturing and after-sales support for crawler spider concrete placing boom — specification, layout and quotation.
View details
crawler hydraulic concrete placing boom
Engineering, manufacturing and after-sales support for crawler hydraulic concrete placing boom — specification, layout and.
View details
Crawler Concrete Boom Pump
Engineering, manufacturing and after-sales support for Crawler Concrete Boom Pump — specification, layout and quotation on.
View details
tracked concrete placing boom
Engineering, manufacturing and after-sales support for tracked concrete placing boom — specification, layout and quotation on.
View details
HAMAC concrete pump
Engineering, manufacturing and after-sales support for HAMAC concrete pump — specification, layout and quotation on request.
View details
Request pricing
Get a Matched Proposal for cement block brick making machine
Tell us the required output, material characteristics, site power supply and destination port. Our engineers return a complete technical and commercial proposal, normally within one working day.
- Layout drawing and foundation loads supplied before order
- Fixed specification quotation with a technical annex
- Spare parts recommendation and operating cost estimate
Email: [email protected]
WhatsApp: +8619138100129
Talk to an engineer
Discuss Your cement block brick making machine Requirement
Twenty years of export experience across eighty countries. One engineer follows your project from enquiry to commissioning.