mobile concrete placing boom
Engineering, manufacturing and after-sales support for mobile concrete placing boom — specification, layout and quotation on.
View detailsConcrete Mixer Pump for Rural Housing from HAMAC - a Chinese manufacturer established in 2005. Combined mixing and pumping units for sites too small for two machines Send your output requirement and get a matched proposal within one working day.

The concept is simple but the engineering is not — the pump needs a continuous, well-mixed, correctly slumped feed. HAMAC mixer pumps therefore use a dedicated mixing drum with a hydraulic-driven agitator, followed by an S-tube valve pump with a hopper that keeps the pump cylinders primed.
A concrete mixer pump for rural housing puts a drum mixer and a concrete pump on one chassis. One diesel engine drives both; one operator controls both; and the truck that would have carried two machines now carries one. For township housing, rural roads, small commercial buildings and repair works, that combination is often the only economic way to pump concrete at all.
Buyers usually compare two things: whether the machine will hold its rated output on a hot day with damp aggregates, and whether anyone will answer the phone in year three. HAMAC designs for both.
Cable or radio remote lets a single worker control pour rate from the placement point.
Mixing and pumping in a single towed or truck-mounted unit dramatically reduces mobilisation cost.
Hydraulic outriggers and folding pipeline mean production begins within about 30 minutes of arrival.
Pipelines carry concrete horizontally or vertically to slabs and columns the truck cannot reach.
Lower fuel burn and smaller crew compared with running a separate mixer and pump.
Runs where site power does not exist, with electric-motor variants available for fixed yards.
Indicative ranges for standard configurations. Final values are confirmed against your project requirements.
| Parameter | Specification |
|---|---|
| Theoretical output | 15 - 50 m³/h |
| Max vertical distance | 30 - 120 m |
| Max horizontal distance | 100 - 500 m |
| Mixing capacity | 350 - 750 litres per batch |
| Concrete slump | 80 - 200 mm |
| Max aggregate size | 20 - 40 mm crushed stone |
| Diesel engine power | 37 - 110 kW |
| Distribution valve | S-tube valve, hydraulic driven |
The applications below reflect the situations in which HAMAC customers most commonly deploy it.
Mobile pours along alignments far from a batching plant
Continuous supply to formwork in confined sites
Foundations, slabs and columns for small to medium residential projects
Large horizontal pours where placing boom reach is sufficient
Second-stage pours above the first floor using pipeline risers




Six defined stages, each with named deliverables, so nothing is left to interpretation.
We start with your mix design, hourly output target, aggregate size, jobsite power supply and site layout — not with a catalogue page.
Our engineering team issues a layout drawing, foundation loads, power requirement and an equipment list matched to the target output.
A fixed specification quotation with clear technical annexes protects both sides; no vague "standard configuration" wording.
Weekly production photos, welding and pressure test records, plus third-party inspection if your project requires it.
Container or break-bulk shipment, then on-site supervision of assembly, alignment, calibration and dry-run.
Remote diagnostics by video call, spare parts dispatch within 48 hours for stocked items, and periodic return visits.
Engineering, manufacturing and after-sales support for mobile concrete placing boom — specification, layout and quotation on.
View details
Engineering, manufacturing and after-sales support for crawler spider concrete placing boom — specification, layout and quotation.
View details
Engineering, manufacturing and after-sales support for crawler hydraulic concrete placing boom — specification, layout and.
View details
Engineering, manufacturing and after-sales support for Crawler Concrete Boom Pump — specification, layout and quotation on.
View details
Engineering, manufacturing and after-sales support for tracked concrete placing boom — specification, layout and quotation on.
View details
Engineering, manufacturing and after-sales support for HAMAC concrete pump — specification, layout and quotation on request.
View detailsTell us the required output, material characteristics, site power supply and destination port. Our engineers return a complete technical and commercial proposal, normally within one working day.
Email: [email protected]
WhatsApp: +8619138100129
Twenty years of export experience across eighty countries. One engineer follows your project from enquiry to commissioning.
Fast reply from our sales engineers, Mon - Sat.
Ask for a quotation, spec sheet or factory video.
Start WhatsApp ChatSpec drawings, quotations and project proposals.
We answer technical enquiries within one working day.
Write an Email