mobile concrete placing boom
Engineering, manufacturing and after-sales support for mobile concrete placing boom — specification, layout and quotation on.
View details
Guides
concrete pump for sell
Concrete Pump for Sell from HAMAC - a Chinese manufacturer established in 2005. Combined mixing and pumping units for sites too small for two machines Send your output requirement and get a matched proposal within one working day.
Concrete Mixer Pumps
concrete pump for sell
The concept is simple but the engineering is not — the pump needs a continuous, well-mixed, correctly slumped feed. HAMAC mixer pumps therefore use a dedicated mixing drum with a hydraulic-driven agitator, followed by an S-tube valve pump with a hopper that keeps the pump cylinders primed.
A concrete pump for sell puts a drum mixer and a concrete pump on one chassis. One diesel engine drives both; one operator controls both; and the truck that would have carried two machines now carries one. For township housing, rural roads, small commercial buildings and repair works, that combination is often the only economic way to pump concrete at all.
Most enquiries we receive start after a fleet problem — a pump that loses pressure on long booms, a mixer whose drum liners wear prematurely, a batching plant whose weighing tolerance drifts. Each of those has an engineering answer, and that answer belongs in the design stage rather than in the warranty claim.
Key Advantages of concrete pump for sell
One operator, one engine
Lower fuel burn and smaller crew compared with running a separate mixer and pump.
Pumping to distance
Pipelines carry concrete horizontally or vertically to slabs and columns the truck cannot reach.
Diesel independence
Runs where site power does not exist, with electric-motor variants available for fixed yards.
Two machines, one footprint
Mixing and pumping in a single towed or truck-mounted unit dramatically reduces mobilisation cost.
Fast set-up
Hydraulic outriggers and folding pipeline mean production begins within about 30 minutes of arrival.
Remote-control operation
Cable or radio remote lets a single worker control pour rate from the placement point.
Technical Parameters
Indicative ranges for standard configurations. Final values are confirmed against your project requirements.
| Parameter | Specification |
|---|---|
| Theoretical output | 15 - 50 m³/h |
| Max vertical distance | 30 - 120 m |
| Max horizontal distance | 100 - 500 m |
| Mixing capacity | 350 - 750 litres per batch |
| Concrete slump | 80 - 200 mm |
| Max aggregate size | 20 - 40 mm crushed stone |
| Diesel engine power | 37 - 110 kW |
| Distribution valve | S-tube valve, hydraulic driven |
Typical Applications
The applications below reflect the situations in which HAMAC customers most commonly deploy it.
Township housing and villas
Foundations, slabs and columns for small to medium residential projects
Water tanks and small bridges
Continuous supply to formwork in confined sites
Wall and floor construction
Second-stage pours above the first floor using pipeline risers
Rural roads and culverts
Mobile pours along alignments far from a batching plant
Repair and retrofit works
Short, frequent pours inside existing structures
From Enquiry to Commissioning
Six defined stages, each with named deliverables, so nothing is left to interpretation.
Requirement study
We start with your mix design, hourly output target, aggregate size, jobsite power supply and site layout — not with a catalogue page.
Scheme design
Our engineering team issues a layout drawing, foundation loads, power requirement and an equipment list matched to the target output.
Quotation & contract
A fixed specification quotation with clear technical annexes protects both sides; no vague "standard configuration" wording.
Production & inspection
Weekly production photos, welding and pressure test records, plus third-party inspection if your project requires it.
Delivery & installation
Container or break-bulk shipment, then on-site supervision of assembly, alignment, calibration and dry-run.
After-sales
Remote diagnostics by video call, spare parts dispatch within 48 hours for stocked items, and periodic return visits.
Frequently Asked Questions about concrete pump for sell
Which model suits a three-storey building?
A 25-30 m³/h unit with 120 m vertical reach handles most three to five-storey residential structures.
How many workers does it need?
Normally three: one at the remote control at the placement point, one managing the feed, and one finishing the concrete.
Can I use it as a standalone mixer?
Yes — many customers discharge directly into wheelbarrows or a skip when pumping is not needed.
What happens if the pour is interrupted?
The hopper agitator keeps the concrete moving; pipelines beyond roughly 30 minutes of inactivity should be cleaned or the concrete re-primed.
Is it difficult to clean?
No. A wash-out port, sponge ball and water tank are standard, and full cleaning takes about 20 minutes.
Related Equipment & Resources
crawler spider concrete placing boom
Engineering, manufacturing and after-sales support for crawler spider concrete placing boom — specification, layout and quotation.
View details
crawler hydraulic concrete placing boom
Engineering, manufacturing and after-sales support for crawler hydraulic concrete placing boom — specification, layout and.
View details
Crawler Concrete Boom Pump
Engineering, manufacturing and after-sales support for Crawler Concrete Boom Pump — specification, layout and quotation on.
View details
tracked concrete placing boom
Engineering, manufacturing and after-sales support for tracked concrete placing boom — specification, layout and quotation on.
View details
HAMAC concrete pump
Engineering, manufacturing and after-sales support for HAMAC concrete pump — specification, layout and quotation on request.
View details
Request pricing
Get a Matched Proposal for concrete pump for sell
Tell us the required output, material characteristics, site power supply and destination port. Our engineers return a complete technical and commercial proposal, normally within one working day.
- Layout drawing and foundation loads supplied before order
- Fixed specification quotation with a technical annex
- Spare parts recommendation and operating cost estimate
Email: [email protected]
WhatsApp: +8619138100129
Talk to an engineer
Discuss Your concrete pump for sell Requirement
Twenty years of export experience across eighty countries. One engineer follows your project from enquiry to commissioning.