HAMAC Factory Visit
Engineering, manufacturing and after-sales support for HAMAC Factory Visit — specification, layout and quotation on request.
View details
Company
2 sets of 6m3 Concrete Mixer Truck were delivered to South East Asia
This customer is a big trading company in his local market and this is his second time to purchase 2 sets of 6m3 concrete mixer trucks, he is satisfied with.
Concrete Mixers
2 sets of 6m3 Concrete Mixer Truck were delivered to South East Asia
HAMAC builds the full family: twin-shaft mixers for central batching plants, counter-current planetary mixers for precast and refractory work, pan mixers for dry-cast block production, reversing drum mixers for small site work, and diesel-driven drum mixers for locations without reliable grid power. Each is selected against your mix design rather than by habit.
Every cubic metre of structural concrete passes through a 2 sets of 6m3 Concrete Mixer Truck were delivered to South East Asia. The machine has one job — distribute cement paste evenly around every aggregate particle in the shortest possible cycle — and when it fails, the failure shows up as strength scatter, segregation during pumping or rejected truckloads.
Most enquiries we receive start after a fleet problem — a pump that loses pressure on long booms, a mixer whose drum liners wear prematurely, a batching plant whose weighing tolerance drifts. Each of those has an engineering answer, and that answer belongs in the design stage rather than in the warranty claim.
Key Advantages of 2 sets of 6m3 Concrete Mixer Truck were delivered to South East Asia
Homogeneity measured, not claimed
Discharge samples tested for strength variance typically fall below 5% across the batch.
Hydraulic or pneumatic discharge
Large-opening gates with adjustable speed prevent segregation at discharge.
Optional tilt/hoist configurations
Available as bare mixer, skip-fed unit, or mounted on a complete plant frame.
Short cycle times
Twin-shaft machines reach full homogeneity in 30-40 seconds, keeping pace with the batching sequence.
Heavy-duty gearboxes
Planetary gear reducers with forced lubrication are selected for 24/7 duty cycles.
Replaceable wear assemblies
Liners, arms and shaft seals are bolted in; no cutting or welding during routine replacement.
Technical Parameters
Indicative ranges for standard configurations. Final values are confirmed against your project requirements.
| Parameter | Specification |
|---|---|
| Mixer type | Twin-shaft / planetary / pan / reversing drum / volumetric |
| Charging capacity | 350 - 6000 litres |
| Output capacity | 250 - 4000 litres per batch |
| Cycle time | 45 - 90 seconds depending on mix |
| Mixing motor power | 11 - 110 kW |
| Discharge | Hydraulic gate / pneumatic gate / reversing drum |
| Liner thickness | 10 - 16 mm wear-resistant plate |
| Drive | Electric motor or diesel engine |
Typical Applications
The applications below reflect the situations in which HAMAC customers most commonly deploy it.
Batching plants
Central mixing for ready-mix and project plants
Precast factories
Low-slump and colour-consistent concrete for moulded products
Refractory and chemical plants
Planetary mixers for castables, ceramics and specialised mortars
Block and paver yards
Dry-cast pan mixers feeding block-making machines
Remote areas without grid power
Diesel-driven units with integrated weighing option
From Enquiry to Commissioning
Six defined stages, each with named deliverables, so nothing is left to interpretation.
Requirement study
We start with your mix design, hourly output target, aggregate size, jobsite power supply and site layout — not with a catalogue page.
Scheme design
Our engineering team issues a layout drawing, foundation loads, power requirement and an equipment list matched to the target output.
Quotation & contract
A fixed specification quotation with clear technical annexes protects both sides; no vague "standard configuration" wording.
Production & inspection
Weekly production photos, welding and pressure test records, plus third-party inspection if your project requires it.
Delivery & installation
Container or break-bulk shipment, then on-site supervision of assembly, alignment, calibration and dry-run.
After-sales
Remote diagnostics by video call, spare parts dispatch within 48 hours for stocked items, and periodic return visits.
Frequently Asked Questions about 2 sets of 6m3 Concrete Mixer Truck were delivered to South East Asia
Is a moisture probe included?
Yes — microwave moisture sensing with automatic water correction is standard on plant-mounted units.
How do I size the mixer to my plant output?
Match batch size to the plant.s rated hourly output divided by the number of batches per hour — normally 40-50 for a twin-shaft installation.
What maintenance is needed on the shaft seals?
Automatic grease injection every shift and shaft-end seal inspection weekly; seals are normally replaced annually.
Twin-shaft or planetary?
Twin-shaft wins on throughput and simple maintenance for ready-mix volumes; planetary gives superior homogeneity for low-slump, coloured or fibre-reinforced mixes and is preferred in precast.
How often should liners be replaced?
Typically after 60,000-100,000 batches for a twin-shaft mixer using rounded aggregate; angular or highly abrasive aggregate shortens that.
Related Equipment & Resources
HAMAC Showcases Complete Machinery Solutions at EXPOMINA Peru 2026
Engineering, manufacturing and after-sales support for HAMAC Showcases Complete Machinery Solutions at EXPOMINA Peru 2026 —.
View details
Escape the Desk Plan: Summer Gathering Now
Engineering, manufacturing and after-sales support for Escape the Desk Plan: Summer Gathering Now — specification, layout and.
View details
Salute to Every Builder on International Workers' Day
Engineering, manufacturing and after-sales support for Salute to Every Builder on International Workers' Day — specification.
View details
Spring at HAMAC: A Season of Growth and Energy
Engineering, manufacturing and after-sales support for Spring at HAMAC: A Season of Growth and Energy — specification, layout and.
View details
HAMAC at PHILCONSTRUCT Manila 2025
Engineering, manufacturing and after-sales support for HAMAC at PHILCONSTRUCT Manila 2025 — specification, layout and quotation.
View details
Request pricing
Get a Matched Proposal for 2 sets of 6m3 Concrete Mixer Truck were delivered to South East Asia
Tell us the required output, material characteristics, site power supply and destination port. Our engineers return a complete technical and commercial proposal, normally within one working day.
- Layout drawing and foundation loads supplied before order
- Fixed specification quotation with a technical annex
- Spare parts recommendation and operating cost estimate
Email: [email protected]
WhatsApp: +8619138100129
Talk to an engineer
Discuss Your 2 sets of 6m3 Concrete Mixer Truck were. Requirement
Twenty years of export experience across eighty countries. One engineer follows your project from enquiry to commissioning.