[email protected] +8619138100129 Mon - Sat 08:30 - 18:00 (GMT+8)
Company

Two units trailer concrete pumps were delivered to South America

On 2 nd , September, two units diesel portable concrete pump were loaded in HAMAC factory and then delivered to South America. These two diesel concrete.

Two units trailer concrete pumps were delivered to South America
Concrete Mixer Pumps

Two units trailer concrete pumps were delivered to South America

The concept is simple but the engineering is not — the pump needs a continuous, well-mixed, correctly slumped feed. HAMAC mixer pumps therefore use a dedicated mixing drum with a hydraulic-driven agitator, followed by an S-tube valve pump with a hopper that keeps the pump cylinders primed.

Output models span roughly 15 to 50 m³/h with horizontal pumping distances between 100 and 500 m, which covers most low-rise and medium-rise horizontal pours. Self-climbing placing booms or separate pipeline extensions add reach where needed.

Buyers usually compare two things: whether the machine will hold its rated output on a hot day with damp aggregates, and whether anyone will answer the phone in year three. HAMAC designs for both.

Key Advantages of Two units trailer concrete pumps were delivered to South America

Remote-control operation

Cable or radio remote lets a single worker control pour rate from the placement point.

Pumping to distance

Pipelines carry concrete horizontally or vertically to slabs and columns the truck cannot reach.

One operator, one engine

Lower fuel burn and smaller crew compared with running a separate mixer and pump.

Diesel independence

Runs where site power does not exist, with electric-motor variants available for fixed yards.

Fast set-up

Hydraulic outriggers and folding pipeline mean production begins within about 30 minutes of arrival.

Two machines, one footprint

Mixing and pumping in a single towed or truck-mounted unit dramatically reduces mobilisation cost.

Technical Parameters

Indicative ranges for standard configurations. Final values are confirmed against your project requirements.

ParameterSpecification
Theoretical output15 - 50 m³/h
Max vertical distance30 - 120 m
Max horizontal distance100 - 500 m
Mixing capacity350 - 750 litres per batch
Concrete slump80 - 200 mm
Max aggregate size20 - 40 mm crushed stone
Diesel engine power37 - 110 kW
Distribution valveS-tube valve, hydraulic driven

Typical Applications

On typical projects this equipment is selected where output reliability governs the whole schedule.

Slab-on-grade and warehouses

Large horizontal pours where placing boom reach is sufficient

Rural roads and culverts

Mobile pours along alignments far from a batching plant

Wall and floor construction

Second-stage pours above the first floor using pipeline risers

Water tanks and small bridges

Continuous supply to formwork in confined sites

Repair and retrofit works

Short, frequent pours inside existing structures

Two units trailer concrete pumps were delivered to South America photo
Two units trailer concrete pumps were delivered to South America photo
Two units trailer concrete pumps were delivered to South America photo
Two units trailer concrete pumps were delivered to South America photo

From Enquiry to Commissioning

Six defined stages, each with named deliverables, so nothing is left to interpretation.

Requirement study

We start with your mix design, hourly output target, aggregate size, jobsite power supply and site layout — not with a catalogue page.

Scheme design

Our engineering team issues a layout drawing, foundation loads, power requirement and an equipment list matched to the target output.

Quotation & contract

A fixed specification quotation with clear technical annexes protects both sides; no vague "standard configuration" wording.

Production & inspection

Weekly production photos, welding and pressure test records, plus third-party inspection if your project requires it.

Delivery & installation

Container or break-bulk shipment, then on-site supervision of assembly, alignment, calibration and dry-run.

After-sales

Remote diagnostics by video call, spare parts dispatch within 48 hours for stocked items, and periodic return visits.

Frequently Asked Questions about Two units trailer concrete pumps were delivered to South America

How many workers does it need?
Normally three: one at the remote control at the placement point, one managing the feed, and one finishing the concrete.
Which model suits a three-storey building?
A 25-30 m³/h unit with 120 m vertical reach handles most three to five-storey residential structures.
Can I use it as a standalone mixer?
Yes — many customers discharge directly into wheelbarrows or a skip when pumping is not needed.
Can the pump handle pumped mixes with 40 mm aggregate?
Models with larger valve openings accept up to 40 mm crushed stone, provided the mix has adequate fines content and slump stays above 120 mm.
Is it difficult to clean?
No. A wash-out port, sponge ball and water tank are standard, and full cleaning takes about 20 minutes.

Related Equipment & Resources

HAMAC Factory Visit

HAMAC Factory Visit

Engineering, manufacturing and after-sales support for HAMAC Factory Visit — specification, layout and quotation on request.

View details
Request pricing

Get a Matched Proposal for Two units trailer concrete pumps were delivered to South America

Tell us the required output, material characteristics, site power supply and destination port. Our engineers return a complete technical and commercial proposal, normally within one working day.

  • Layout drawing and foundation loads supplied before order
  • Fixed specification quotation with a technical annex
  • Spare parts recommendation and operating cost estimate

Email: [email protected]
WhatsApp: +8619138100129

Quick Enquiry

We reply within one working day. Your details stay confidential and are never shared.

Talk to an engineer

Discuss Your Two units trailer concrete pumps were. Requirement

Twenty years of export experience across eighty countries. One engineer follows your project from enquiry to commissioning.

Chat on WhatsApp

Fast reply from our sales engineers, Mon - Sat.

+8619138100129

Ask for a quotation, spec sheet or factory video.

Start WhatsApp Chat
Send us an Email

Spec drawings, quotations and project proposals.

We answer technical enquiries within one working day.

Write an Email