HAMAC Factory Visit
Engineering, manufacturing and after-sales support for HAMAC Factory Visit — specification, layout and quotation on request.
View details
Company
Concrete Pump and concrete mixers were sent to South America
DHBT40 Diesel Driven Concrete Pump and JZR500 diesel engine concrete mixers were sent to South America on October 3rd . This concrete pump is driven by.
Concrete Mixer Pumps
Concrete Pump and concrete mixers were sent to South America
A Concrete Pump and concrete mixers were sent to South America puts a drum mixer and a concrete pump on one chassis. One diesel engine drives both; one operator controls both; and the truck that would have carried two machines now carries one. For township housing, rural roads, small commercial buildings and repair works, that combination is often the only economic way to pump concrete at all.
The concept is simple but the engineering is not — the pump needs a continuous, well-mixed, correctly slumped feed. HAMAC mixer pumps therefore use a dedicated mixing drum with a hydraulic-driven agitator, followed by an S-tube valve pump with a hopper that keeps the pump cylinders primed.
Buyers usually compare two things: whether the machine will hold its rated output on a hot day with damp aggregates, and whether anyone will answer the phone in year three. HAMAC designs for both.
Key Advantages of Concrete Pump and concrete mixers were sent to South America
Remote-control operation
Cable or radio remote lets a single worker control pour rate from the placement point.
Fast set-up
Hydraulic outriggers and folding pipeline mean production begins within about 30 minutes of arrival.
Pumping to distance
Pipelines carry concrete horizontally or vertically to slabs and columns the truck cannot reach.
Two machines, one footprint
Mixing and pumping in a single towed or truck-mounted unit dramatically reduces mobilisation cost.
One operator, one engine
Lower fuel burn and smaller crew compared with running a separate mixer and pump.
Diesel independence
Runs where site power does not exist, with electric-motor variants available for fixed yards.
Technical Parameters
Indicative ranges for standard configurations. Final values are confirmed against your project requirements.
| Parameter | Specification |
|---|---|
| Theoretical output | 15 - 50 m³/h |
| Max vertical distance | 30 - 120 m |
| Max horizontal distance | 100 - 500 m |
| Mixing capacity | 350 - 750 litres per batch |
| Concrete slump | 80 - 200 mm |
| Max aggregate size | 20 - 40 mm crushed stone |
| Diesel engine power | 37 - 110 kW |
| Distribution valve | S-tube valve, hydraulic driven |
Typical Applications
The applications below reflect the situations in which HAMAC customers most commonly deploy it.
Water tanks and small bridges
Continuous supply to formwork in confined sites
Wall and floor construction
Second-stage pours above the first floor using pipeline risers
Repair and retrofit works
Short, frequent pours inside existing structures
Slab-on-grade and warehouses
Large horizontal pours where placing boom reach is sufficient
Rural roads and culverts
Mobile pours along alignments far from a batching plant
From Enquiry to Commissioning
Six defined stages, each with named deliverables, so nothing is left to interpretation.
Requirement study
We start with your mix design, hourly output target, aggregate size, jobsite power supply and site layout — not with a catalogue page.
Scheme design
Our engineering team issues a layout drawing, foundation loads, power requirement and an equipment list matched to the target output.
Quotation & contract
A fixed specification quotation with clear technical annexes protects both sides; no vague "standard configuration" wording.
Production & inspection
Weekly production photos, welding and pressure test records, plus third-party inspection if your project requires it.
Delivery & installation
Container or break-bulk shipment, then on-site supervision of assembly, alignment, calibration and dry-run.
After-sales
Remote diagnostics by video call, spare parts dispatch within 48 hours for stocked items, and periodic return visits.
Frequently Asked Questions about Concrete Pump and concrete mixers were sent to South America
How many workers does it need?
Normally three: one at the remote control at the placement point, one managing the feed, and one finishing the concrete.
Is it difficult to clean?
No. A wash-out port, sponge ball and water tank are standard, and full cleaning takes about 20 minutes.
Which model suits a three-storey building?
A 25-30 m³/h unit with 120 m vertical reach handles most three to five-storey residential structures.
Can the pump handle pumped mixes with 40 mm aggregate?
Models with larger valve openings accept up to 40 mm crushed stone, provided the mix has adequate fines content and slump stays above 120 mm.
What happens if the pour is interrupted?
The hopper agitator keeps the concrete moving; pipelines beyond roughly 30 minutes of inactivity should be cleaned or the concrete re-primed.
Related Equipment & Resources
HAMAC Showcases Complete Machinery Solutions at EXPOMINA Peru 2026
Engineering, manufacturing and after-sales support for HAMAC Showcases Complete Machinery Solutions at EXPOMINA Peru 2026 —.
View details
Escape the Desk Plan: Summer Gathering Now
Engineering, manufacturing and after-sales support for Escape the Desk Plan: Summer Gathering Now — specification, layout and.
View details
Salute to Every Builder on International Workers' Day
Engineering, manufacturing and after-sales support for Salute to Every Builder on International Workers' Day — specification.
View details
Spring at HAMAC: A Season of Growth and Energy
Engineering, manufacturing and after-sales support for Spring at HAMAC: A Season of Growth and Energy — specification, layout and.
View details
HAMAC at PHILCONSTRUCT Manila 2025
Engineering, manufacturing and after-sales support for HAMAC at PHILCONSTRUCT Manila 2025 — specification, layout and quotation.
View details
Request pricing
Get a Matched Proposal for Concrete Pump and concrete mixers were sent to South America
Tell us the required output, material characteristics, site power supply and destination port. Our engineers return a complete technical and commercial proposal, normally within one working day.
- Layout drawing and foundation loads supplied before order
- Fixed specification quotation with a technical annex
- Spare parts recommendation and operating cost estimate
Email: [email protected]
WhatsApp: +8619138100129
Talk to an engineer
Discuss Your Concrete Pump and concrete mixers were. Requirement
Twenty years of export experience across eighty countries. One engineer follows your project from enquiry to commissioning.