Experience sharing of excavator bucket reinforcement

Under normal circumstances, the side knife, bottom plate, side plate, and tooth root of the bucket are the places with relatively large wear. Therefore, when the degree of wear of these places is regularly observed, these places should be strengthened. Tooth root strengthening: The tooth root mounting plate has been strengthened very well. In the daily work of the excavator, due to poor strengthening, severe wear will occur at the tooth root, and the bucket teeth will not be able to be installed for a long time. For the reinforcement here, two solutions can be adopted, one is to attach reinforcing ribs, and the other is to pack wear-resistant blocks. It should be noted that the method of attaching reinforcing ribs is simple and economical, but when welding, be careful not to overlap the welding seam of the tooth root, which will affect the welding strength of the tooth root. Side boards and side edges are strengthened: The violent wear of the side boards will reduce the effective bucket

Buyers usually compare two things: whether the machine will hold its rated output on a hot day with damp aggregates, and whether anyone will answer the phone in year three. HAMAC designs for both.