Concrete Mixer with Pump
Engineering, manufacturing and after-sales support for Concrete Mixer with Pump — specification, layout and quotation on request.
View details
Concrete Mixers
SICOMA Double Shaft Concrete Mixer - Concrete Mixers
SICOMA twin shaft concrete mixer is a type of concrete mixer, which mainly consists of tank system, mixing system, driving system, seal lubricating system.
Concrete Mixers
SICOMA Double Shaft Concrete Mixer - Concrete Mixers
Wear is the real operating cost. Shaft-end seals, liner plates and mixing arms are therefore designed as replaceable assemblies, dimensioned so that maintenance crews can change them on site within a single shift.
Every cubic metre of structural concrete passes through a SICOMA Double Shaft Concrete Mixer. The machine has one job — distribute cement paste evenly around every aggregate particle in the shortest possible cycle — and when it fails, the failure shows up as strength scatter, segregation during pumping or rejected truckloads.
Buyers usually compare two things: whether the machine will hold its rated output on a hot day with damp aggregates, and whether anyone will answer the phone in year three. HAMAC designs for both.
Key Advantages of SICOMA Double Shaft Concrete Mixer
Homogeneity measured, not claimed
Discharge samples tested for strength variance typically fall below 5% across the batch.
Optional tilt/hoist configurations
Available as bare mixer, skip-fed unit, or mounted on a complete plant frame.
Replaceable wear assemblies
Liners, arms and shaft seals are bolted in; no cutting or welding during routine replacement.
Heavy-duty gearboxes
Planetary gear reducers with forced lubrication are selected for 24/7 duty cycles.
Hydraulic or pneumatic discharge
Large-opening gates with adjustable speed prevent segregation at discharge.
Short cycle times
Twin-shaft machines reach full homogeneity in 30-40 seconds, keeping pace with the batching sequence.
Technical Parameters
Indicative ranges for standard configurations. Final values are confirmed against your project requirements.
| Parameter | Specification |
|---|---|
| Mixer type | Twin-shaft / planetary / pan / reversing drum / volumetric |
| Charging capacity | 350 - 6000 litres |
| Output capacity | 250 - 4000 litres per batch |
| Cycle time | 45 - 90 seconds depending on mix |
| Mixing motor power | 11 - 110 kW |
| Discharge | Hydraulic gate / pneumatic gate / reversing drum |
| Liner thickness | 10 - 16 mm wear-resistant plate |
| Drive | Electric motor or diesel engine |
Typical Applications
Field experience across our export markets shows a clear pattern of applications.
Remote areas without grid power
Diesel-driven units with integrated weighing option
Precast factories
Low-slump and colour-consistent concrete for moulded products
Batching plants
Central mixing for ready-mix and project plants
Refractory and chemical plants
Planetary mixers for castables, ceramics and specialised mortars
Block and paver yards
Dry-cast pan mixers feeding block-making machines
From Enquiry to Commissioning
Six defined stages, each with named deliverables, so nothing is left to interpretation.
Requirement study
We start with your mix design, hourly output target, aggregate size, jobsite power supply and site layout — not with a catalogue page.
Scheme design
Our engineering team issues a layout drawing, foundation loads, power requirement and an equipment list matched to the target output.
Quotation & contract
A fixed specification quotation with clear technical annexes protects both sides; no vague "standard configuration" wording.
Production & inspection
Weekly production photos, welding and pressure test records, plus third-party inspection if your project requires it.
Delivery & installation
Container or break-bulk shipment, then on-site supervision of assembly, alignment, calibration and dry-run.
After-sales
Remote diagnostics by video call, spare parts dispatch within 48 hours for stocked items, and periodic return visits.
Frequently Asked Questions about SICOMA Double Shaft Concrete Mixer
Can you supply only the mixer to retrofit an existing plant?
Yes. We supply bare mixers with mounting frames, gate actuators and control interfaces for third-party plants.
How do I size the mixer to my plant output?
Match batch size to the plant.s rated hourly output divided by the number of batches per hour — normally 40-50 for a twin-shaft installation.
What maintenance is needed on the shaft seals?
Automatic grease injection every shift and shaft-end seal inspection weekly; seals are normally replaced annually.
Is a moisture probe included?
Yes — microwave moisture sensing with automatic water correction is standard on plant-mounted units.
How often should liners be replaced?
Typically after 60,000-100,000 batches for a twin-shaft mixer using rounded aggregate; angular or highly abrasive aggregate shortens that.
Related Equipment & Resources
Self
Engineering, manufacturing and after-sales support for Self — specification, layout and quotation on request.
View details
JZR Diesel Driven Concrete Mixer
Engineering, manufacturing and after-sales support for JZR Diesel Driven Concrete Mixer — specification, layout and quotation on.
View details
JZ series Concrete Mixer
Engineering, manufacturing and after-sales support for JZ series Concrete Mixer — specification, layout and quotation on request.
View details
European Tech.Twin shaft Concrete Mixer
Engineering, manufacturing and after-sales support for European Tech.Twin shaft Concrete Mixer — specification, layout and.
View details
SICOMA Planetary Concrete Mixer
Engineering, manufacturing and after-sales support for SICOMA Planetary Concrete Mixer — specification, layout and quotation on.
View details
Request pricing
Get a Matched Proposal for SICOMA Double Shaft Concrete Mixer
Tell us the required output, material characteristics, site power supply and destination port. Our engineers return a complete technical and commercial proposal, normally within one working day.
- Layout drawing and foundation loads supplied before order
- Fixed specification quotation with a technical annex
- Spare parts recommendation and operating cost estimate
Email: [email protected]
WhatsApp: +8619138100129
Talk to an engineer
Discuss Your SICOMA Double Shaft Concrete Mixer Requirement
Twenty years of export experience across eighty countries. One engineer follows your project from enquiry to commissioning.