Crawler
Engineering, manufacturing and after-sales support for Crawler — specification, layout and quotation on request.
View details
Concrete Pumps & Placing Booms
Manual Concrete Placing Boom - Concrete Pumps & Placing Booms
HG series manual concrete placing boom of 12m, 15m and 18m, is a new product of our company produced for enlarging the range of concrete pouring and.
Concrete Pumps & Placing Booms
Manual Concrete Placing Boom - Concrete Pumps & Placing Booms
Concrete has to arrive at the formwork continuously and without segregation. That is the entire purpose of this product family: Manual Concrete Placing Boom equipment takes plastic concrete from a truck or mixer and delivers it horizontally along a pipeline or vertically through a placed boom, at a rate the finishing crew can absorb.
HAMAC supplies truck-mounted boom pumps for high-rise and large slabs, static and trailer line pumps for tunnels and long horizontal runs, spider placing booms for wide industrial floors, self-climbing booms that travel with the core of a tower, and separate placing masts for precast yards.
Buyers usually compare two things: whether the machine will hold its rated output on a hot day with damp aggregates, and whether anyone will answer the phone in year three. HAMAC designs for both.
Key Advantages of Manual Concrete Placing Boom
Safety built into the controls
Outrigger interlocks, boom angle limits and emergency stop circuits protect both crew and structure.
S-tube valve reliability
Hardened wear plates and cutting rings provide extended service intervals under abrasive mixes.
Continuous placement
Steady flow keeps cold joints out of slabs and eliminates the double-handling cost of crane-and-skip methods.
Boom reach without a crane
Independent placing puts concrete precisely where the crew is working without occupying lifting capacity.
Diesel and electric variants
Choose engine power for remote sites or electric motors for tunnels and urban night work.
Wash-out systems included
Integrated water tank, high-pressure pump and cleaning accessories reduce end-of-shift time.
Technical Parameters
Indicative ranges for standard configurations. Final values are confirmed against your project requirements.
| Parameter | Specification |
|---|---|
| Pump type | Trailer line pump / truck-mounted boom pump / truck mixer with pump |
| Theoretical output | 15 - 120 m³/h |
| Concrete pressure | 5 - 22 MPa |
| Boom vertical reach | 21 - 63 m depending on model |
| Max horizontal distance | 200 - 1500 m with pipeline |
| Distribution valve | S-tube / gate valve |
| Max aggregate size | 20 - 50 mm |
| Power | Diesel engine 60 - 300 kW / electric motor 45 - 200 kW |
Typical Applications
The applications below reflect the situations in which HAMAC customers most commonly deploy it.
Bridges and viaducts
Long horizontal pumping runs to piers and deck segments
Large industrial slabs
Spider booms covering wide floor areas without repositioning
Tunnels and mines
Electric line pumps working under low ventilation constraints
Precast and yard casting
Fixed placing booms serving repetitive casting beds
Dams and hydropower
Mass pours with sustained continuous output
From Enquiry to Commissioning
Six defined stages, each with named deliverables, so nothing is left to interpretation.
Requirement study
We start with your mix design, hourly output target, aggregate size, jobsite power supply and site layout — not with a catalogue page.
Scheme design
Our engineering team issues a layout drawing, foundation loads, power requirement and an equipment list matched to the target output.
Quotation & contract
A fixed specification quotation with clear technical annexes protects both sides; no vague "standard configuration" wording.
Production & inspection
Weekly production photos, welding and pressure test records, plus third-party inspection if your project requires it.
Delivery & installation
Container or break-bulk shipment, then on-site supervision of assembly, alignment, calibration and dry-run.
After-sales
Remote diagnostics by video call, spare parts dispatch within 48 hours for stocked items, and periodic return visits.
Frequently Asked Questions about Manual Concrete Placing Boom
Boom pump or line pump?
If the pour point moves often and sits within boom reach, a boom pump wins on labour. If concrete must travel far horizontally or vertically beyond the boom, use a line pump and pipeline.
How tall can it pump?
Vertical reaches of 100-150 m are routine with correctly designed pipelines and adequate concrete pressure.
Do I need a special mix design for pumping?
Yes, a pumpable mix: continuous grading, sufficient fines (roughly 350-400 kg/m³ below 0.25 mm), and no gap-graded coarse aggregate.
What is the expected service life of wear parts?
Delivery cylinders 40,000-80,000 m³, cutting ring and wear plate 15,000-30,000 m³ depending on aggregate abrasiveness.
Can the machine handle low-slump concrete?
Most units are optimised for 120-200 mm slump; below that, pressure requirements rise sharply and output falls.
Related Equipment & Resources
Crawler Hydraulic Concrete Placing Boom
Engineering, manufacturing and after-sales support for Crawler Hydraulic Concrete Placing Boom — specification, layout and.
View details
Crawler Concrete Mixer with Pump Truck
Engineering, manufacturing and after-sales support for Crawler Concrete Mixer with Pump Truck — specification, layout and.
View details
Trailer Concrete Mixer Pump
Engineering, manufacturing and after-sales support for Trailer Concrete Mixer Pump — specification, layout and quotation on.
View details
Concrete Mixer Truck For Sale
Engineering, manufacturing and after-sales support for Concrete Mixer Truck For Sale — specification, layout and quotation on.
View details
Trailer Concrete Pump
Engineering, manufacturing and after-sales support for Trailer Concrete Pump — specification, layout and quotation on request.
View details
Request pricing
Get a Matched Proposal for Manual Concrete Placing Boom
Tell us the required output, material characteristics, site power supply and destination port. Our engineers return a complete technical and commercial proposal, normally within one working day.
- Layout drawing and foundation loads supplied before order
- Fixed specification quotation with a technical annex
- Spare parts recommendation and operating cost estimate
Email: [email protected]
WhatsApp: +8619138100129
Talk to an engineer
Discuss Your Manual Concrete Placing Boom Requirement
Twenty years of export experience across eighty countries. One engineer follows your project from enquiry to commissioning.