JZR500DH Concrete Mixer
JZR500DH diesel concrete mixer is driven by diesel engine. There are two feeding modes: climbing bucket.
View details
Block Making Machines
Concrete Block Making Plant - Page Two
HAMAC QT series of brick making machine is a concrete block making equipment. By changing the moulds, it can produce diverse kinds of concrete wall blocks.
Block Making Machines
Concrete Block Making Plant - Page Two
HAMAC QT series of brick making machine is a concrete block making equipment. By changing the moulds, it can produce diverse kinds of concrete wall blocks, such as: insulating block, hollow block, holes block, solid block; and paver blocks, such as: interlock block, Dutch block, curb; as well as concrete members, dry base brick, planter bricks, fence block for parks, air port and wharf, etc.This equipment is the most advanced, reliable machine for making high quality, high intensity concrete blocks or fly-ash bricks. Multiple producing lines with different configurations can satisfy clients
Showing 25–28 of 28 entries
JZC350 Concrete Mixer
Since the machine is off-bipyramidal reversal discharging mobile concrete mixer, mixing semi-rigid plastic.
View details
QT4-15B Block Making Plant
Uses high-dynamic proportional and directional valves, which automatically adjust the oil flow and pressure.
View details
MP500 Planetary Concrete Mixers
MP500 planetary concrete mixer adopted Germany technique used for mixing concrete .It is not only applies in.
View detailsWhat Defines a Good Block Making Machines
HAMAC builds both egg-layer machines — economical, no pallets, output onto the floor — and full stationary pallet plants with finger cars, elevators and curing racks for higher volume and better surface finish. Mixing is matched to the machine by either a planetary or a pan mixer.
A Concrete Block Making Plant - Page Two converts zero-slump concrete into saleable units in about 20 seconds: the mould fills, the press head descends while the table vibrates, the green product is demoulded onto a pallet and moves to curing. Everything after that is handling and logistics.
PLC recipe control
Operators select the product and the machine sets vibration, fill time and press parameters automatically.
Cycle times near 15 seconds
Well-matched moulds and Servo vibration deliver fast demould without green-product damage.
Consistent compaction
Frequency-controlled vibration plus hydraulic press head ensures uniform density across the whole pallet.
Buying Questions Answered
Can I use fly ash instead of cement?
Yes, typically replacing 20-40% of cement by weight, subject to the strength requirement and local standards.
Which model should I start with?
For roughly 8,000-10,000 blocks per shift an QT4-15 class machine is mainstream; above 20,000 units per shift consider an QT8-15 or larger pallet plant.
Do I need pallets?
Egg-layer machines do not use pallets; stationary plants do, and pallet cost and life should be factored into the model comparison.
What about cement content?
Typically 8-12% by weight for hollow blocks depending on the required strength and aggregate quality.
Talk to an engineer
Need Help Narrowing Down the Choice?
Send your output requirement and site conditions; we will shortlist the configurations that actually fit.